Driving assistance
PC (realistic)

• W Turn on the battery (3 sec on the NAT)

• V Unlock the lever box

• P Raise the pantograph (SHIFT + P to raise the 2nd pantograph)

• T Close the circuit breaker

• N Change the voltage (depending on the train, see Our Trains)

• Y Engage the circuit breaker (for 3 sec)

• K Driving Mode +

• J Driving Mode -

• Z Reversing Switch +

• S Reversing Switch -

• D Traction Control Lever +

• Q Traction Control Lever -

• R Empty the air duct (brake -)

• F Empty the air duct (brake -)

• A Acknowledge the KVB

• U Open left door (Shift + U to force the doors open)

• O Open left door (Shift + U to force the doors open)

• I Close the doors

• L Turn the headlights on/off

• ù Turn the cab lights on/off

• G Turn the cab lights on/off

• H High-pitched horn

• B Low-pitched horn

• X Emergency brake

• CTRL VACMA

• , Display the SIRIUS tablet (or by clicking on the time in the upper right corner)

• 1 à 5 Cameras

• CTRL + P Freecam

• W Turn on the battery (3 sec on the NAT)

• V Unlock the lever box

• P Raise the pantograph

• (N) Change the voltage (depending on the train, see Our Trains)

• T Close the circuit

• Y Engage the circuit breaker (for 3 sec)

• K Driving Mode

• Z Forward reverser

Before the "Lower Pantograph" sign :

• T Open the circuit breaker

• P Lower the pantograph

• (N) Change the voltage (depending on the train, see Our Trains)

After passing the "Rev" sign :

• P Raise the pantograph

• T Close the circuit breaker

• Y Engage the circuit breaker (for 3 sec)

⚠️ Coupling can only be carried out in the presence of a regulator (ADR). Please mention @🚦 Astreinte Régulation on our Discord server.

Nota : The coupled train must be completely switched off.

On the BB60000 :

• J (x2) Coupling mode

• Move forward to the train

To go again :

• Move forward a little

• K (x2) Driving mode