Aide conduite
PC (simplified)

• 1 Turn on the battery (3 sec on the NAT)

• 2 Unlock the lever box

• 8 Raise the pantograph (SHIFT + P to raise the 2nd pantograph)

• 10 Close the circuit breaker

• 9 Change the voltage (depending on the train, see Our Trains)

• 11 Engage the circuit breaker (for 3 sec)

• 14 Driving Mode

• 13 Reversing Switch +

• D Traction Control Lever +

• Q Traction Control Lever -

• R Empty the air duct (brake -)

• F Empty the air duct (brake -)

• 3 Acknowledge the KVB

• 5 Open left door (Shift + U to force the doors open)

• 7 Open left door (Shift + U to force the doors open)

• 6 Close the doors

• 17 Turn the headlights on/off

• 19 Turn the cab lights on/off

• 18 Turn the cab lights on/off

• 15 High-pitched horn

• 16 Low-pitched horn

• 4 Emergency brake

• CTRL VACMA

• , Display the SIRIUS tablet (or by clicking on the time in the upper right corner)

• 12 Cameras

• 19 Announcements

• CTRL + P Freecam

• 1 Turn on the battery (3 sec on the NAT)

• 2 Unlock the lever box

• 8 Raise the pantograph

• (9) Change the voltage (depending on the train, see Our Trains)

• T Close the circuit

• Y Engage the circuit breaker (for 3 sec)

• K Driving Mode

• Z Forward reverser

Before the "Lower Pantograph" sign :

• 10 Open the circuit breaker

• 8 Lower the pantograph

• (9) Change the voltage (depending on the train, see Our Trains)

After passing the "Rev" sign :

• 8 Raise the pantograph

• 10 Close the circuit breaker

• 11 Engage the circuit breaker (for 3 sec)

⚠️ Coupling can only be carried out in the presence of a regulator (ADR). Please mention @🚦 Astreinte Régulation on our Discord server.

Nota : The coupled train must be completely switched off.

On the BB60000 :

• J (x2) Coupling mode

• Move forward to the train

Pour go again :

• Move forward a little

• K (x2) Driving mode